Products
Stainless Steel Angles
Maruti Inox is a manufacturer and supplier of stainless steel angles in Gujarat, India, with its manufacturing facility located in Mehsana. Our stainless steel angles are hot rolled and supplied in HRAP (Hot Rolled Annealed & Pickled) condition for structural, fabrication and industrial applications. Available in sizes from 20 × 20 mm to 50 × 50 mm, with lengths up to 6.0 metres, the angles are supplied with applicable ASTM A484 dimensional requirements.
Stainless Steel Angles Specifications
Our stainless steel angles are available in different sizes for structural, fabrication and industrial requirements. The table below outlines the available size range, supply condition, dimensional requirements and lengths.
|
Product
|
Size (mm)
|
Size (inch)
|
Supply condition
|
Size tolerance
|
Length
|
|---|---|---|---|---|---|
|
Angles
|
20 x 20 - 50 x 50
(3/4" x 3/4" - 2" x 2") |
3- 6
(1/8" - 1/4") |
HRAP
|
ASTM A484
|
Up to 6.0 metres
|
Scroll Right Side
What are Stainless Steel Angles?
Stainless steel angles are L-shaped sections manufactured from stainless steel and used where structural support, corrosion resistance and fabrication capability are required.
The two legs of an angle section meet at a right angle, making stainless steel angle bars suitable for frames, supports, brackets, structural assemblies and fabricated components. The appropriate angle size and stainless steel grade can be selected according to the requirements of the finished application.
Hot rolling is used to form the angle profile from heated stainless steel material. The HRAP (Hot Rolled Annealed & Pickled) condition provides a processed surface suitable for a range of structural and fabrication applications.
Applications of Stainless Steel Angles
Stainless steel angle sections are commonly used in structural, fabrication and industrial applications where corrosion resistance and mechanical strength are important.
Typical applications include:
- Structural supports
- Fabricated structures
- Construction components
- Frames and brackets
- Industrial equipment
- Chemical equipment
- Machinery components
- Support structures
- Process equipment
- General fabrication
Industrial assemblies
The required stainless steel grade and angle size should be selected according to the operating environment, mechanical requirements, fabrication process and service conditions of the finished component.
How to Select the Right Stainless Steel Angle
Selecting the right stainless steel angle depends on the requirements of the finished structure or component. Important factors include:
Material Grade: Select the stainless steel grade according to corrosion exposure, mechanical requirements, temperature conditions and the intended application.
Angle Size: Select the required leg dimensions according to the structural, fabrication or assembly requirements of the component.
Supply Condition: HRAP material can be selected when the application requires a hot rolled, annealed and pickled condition.
Required Length: Specify the required length according to cutting, handling and downstream fabrication requirements.
Dimensional Requirements: Check the required dimensions and applicable dimensional tolerances before ordering.
Why Choose Maruti Inox for Stainless Steel Angles?
If you are looking for a stainless steel angles manufacturer and supplier in India, Maruti Inox manufactures stainless steel angles at its integrated facility in Mehsana, Gujarat. Our manufacturing process supports controlled production, consistent dimensions and material traceability for structural, fabrication and industrial applications.
Stainless steel angles are produced under a TÜV SÜD ISO 9001:2015 certified quality management system, supporting controlled production and consistent quality. Our Stainless Steel Long products are supplied with applicable product requirements and material documentation to support quality verification and downstream processing.
Contact our team to confirm product availability, size requirements and other specifications for your application.
Frequently Asked Questions
Stainless steel angles are L-shaped sections manufactured from stainless steel and used for structural supports, frames, brackets, fabrication and industrial applications where corrosion resistance and structural strength are required.
Maruti Inox supplies stainless steel angles in sizes from 20 × 20 mm to 50 × 50 mm, corresponding to approximately 3/4 × 3/4 inch to 2 × 2 inch.
Maruti Inox stainless steel angles are supplied in HRAP (Hot Rolled Annealed & Pickled) condition.
The stainless steel angles are supplied with applicable ASTM A484 dimensional requirements.
Stainless steel angles from Maruti Inox are available in lengths up to 6.0 metres, subject to product and order requirements.
Yes. Maruti Inox manufactures and supplies stainless steel angles in Gujarat, India, from its manufacturing facility in Mehsana.
HRAP stands for Hot Rolled Annealed and Pickled. In this condition, the angles are hot rolled to shape, annealed to relieve internal stresses and pickled to remove surface scale, resulting in a clean surface suitable for structural and fabrication applications.